Accelerate/Brake Lever with T- or L-grip
The Accelerate/Brake Lever is supplied with both an L- and T-grip which can be mounted depending on the preference of the user. The T-grip is symmetrical, the L-grip can be fitted on the left or right side. In contrast to the Accelerator/Brake Slider with 3-pin device where the hand is inserted vertically, this Accelerate/Brake slider is operated by hand in a horizontal position.
The Accelerate/Brake Lever initially has many similarities with Accelerate/Brake Slider with L or T-grip, but still differs on many points. The Accelerate/Brake Lever has a slightly rotating movement, so that the grip with full gas and full brakes is slightly lower than in the middle position. The Accelerate/Brake Slider is a completely linear movement. The Accelerate/Brake Lever requires a shorter stroke and lower operating force. To compensate for the shorter stroke a damper has been added that dampens out short fast movements. The Accelerate/Brake Lever requires less installation space in the length than the Accelerate/Brake Slider but sits slightly higher.
The driver can determine the desired brake and accelerator action by moving the device forwards or backwards. The Accelerate/Brake Lever is equipped with a damper that dampens fast movements. This provides a very good controllability of gas and brake, even if the road is bumpy. The direction of the operation of the gas and brake is personalised by using the most up to date software
This product can only be used in combination with SmartBrake and SmartGas.
Advantages Accelerate/Brake Lever with T- or L-grip
- Very Low Effort
- High Quality Finish
- Perfect Controllability
- Built-in Damping