back to the overview

Gas/brake lever with T- or L-grip

This input device enables the driver to comfortably and easily brake and accelerate by hand with minimal effort. The gas / brake lever is supplied with both an L- and T-grip which can be mounted depending on the preference of the user. The T-grip is symmetrical, the L-grip can be fitted on the left or right side.

The gas / brake lever initially has many similarities with the gas / brake slider with L or T-grip, but still differs on many points. The gas / brake lever is a slightly rotating movement, so that the grip with full gas and full brakes is slightly lower than in the middle position. The gas / brake slider is a completely linear movement. The gas / brake lever requires a shorter stroke and lower operating force. To compensate for the shorter stroke a damper has been added that dampens out short fast movements. The gas / brake lever requires less installation space in the length than the slide, but is slightly higher.

The driver can determine the desired brake and accelerator action by moving the device forwards or backwards. The liver is equipped with a damper that dampens fast movements. This provides a very good controllability of gas and brake, even if the road is bumpy. The direction of operation of gas and brake is selectable by software. The gas/brake lever is commonly used by quadraplegics.

This product can only be used in combination with SmartBrake and SmartGas.

Advantages Gas/brake lever with T- or L-grip

  • very low effort
  • Built-in damping
  • high quality materials
  • perfect controllability
back to the overview